I know that there is a WIP for a future article about router platforms, but from the little I’ve read on the Github issue page and a few videos I’ve watched I decided to make this plan right here:
Put my ISP router in AP only mode, connect it to a Protectli Vault as my firewall, get a managed switch that supports vland (still haven’t found a good one, if anyone can recommend one I’d appreciate it) and have a Turris Omnia as my wireless access point.
Is this a good secure network setup? (also once again, recs for a switch would be appreciated)
Why? Don’t get me wrong, I have an Omnia as well and think it’s awesome, but I use it as an all-in-one router, as a pure wireless access point I’m sure you could get something less expensive.
Most routers can have VLAN functionality if you flash them with custom firmware. You get allllll the settings then. I have a netgear router that now has an FTP server and a bunch of other stuff. All you have to do is make sure the model you buy has a chipset supported by the firmware. Firmwares include:
DD-WRT
Tomato
AdvancedTomato
OpenWRT
Chilifire
Gargoyle
I’m sure someone will come in and say that using a consumer grade router is naff, but in my (somewhat limited) experience working with managed switches in an industrial setting, a custom consumer router is much more feature-rich. Unless you need the IO of a managed switch (ie SFPs) I see no reason to go down that route.
If you are using SFPs, be sure to get the knock off ones that can be programmed - there should be places that sell them and program them at no extra cost. They can literally be 1/10 of the cost of the manufacturer’s own modules.
if the firewall can be updated regularly then sure.
Mikrotik makes perfectly acceptable switches at a reasonable price with a variety of features, vlan compat is pretty common. A MikroTik CSS610-8P-2S+in will give you 2 10 Gb sfp , 8 x 1Gbe with PoE+ and vlans for under 300 bucks.
I’m not OP but that 'tik is almost perfect for me, going along with the RB5009 I already have. Is there something similar that can run RouterOS I wonder?
There definately is something. They have a ton of products. I’d have to look through my list as well. The CSS runs switchos lite, but honestly its fine. I can do CLI configs (brocade, cisco, cisco smb etc) but its whatever.
At my parents house i have been using a Mikrotik RB260GSP since about 2016 on their net. It also runs swos and im not doing anything crazy on it (in fact i never bothered with VLAN’s there though i probably should setup a guest vlan. But its been fine for years now.
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: !privacyguides@lemmy.one
In the digital age, protecting your personal information might seem like an impossible task. We’re here to help.
This is a community for sharing news about privacy, posting information about cool privacy tools and services, and getting advice about your privacy journey.
You can subscribe to this community from any Kbin or Lemmy instance:
Check out our website at privacyguides.org before asking your questions here. We’ve tried answering the common questions and recommendations there!
Want to get involved? The website is open-source on GitHub, and your help would be appreciated!
This community is the “official” Privacy Guides community on Lemmy, which can be verified here. Other “Privacy Guides” communities on other Lemmy servers are not moderated by this team or associated with the website.
Moderation Rules:
We prefer posting about open-source software whenever possible.
No soliciting engagement: Don’t ask for upvotes, follows, etc.
Surveys, Fundraising, and Petitions must be pre-approved by the mod team.
Be civil, no violence, hate speech. Assume people here are posting in good faith.
Don’t repost topics which have already been covered here.
News posts must be related to privacy and security, and your post title must match the article headline exactly. Do not editorialize titles, you can post your opinions in the post body or a comment.
Memes/images/video posts that could be summarized as text explanations should not be posted. Infographics and conference talks from reputable sources are acceptable.
No help vampires: This is not a tech support subreddit, don’t abuse our community’s willingness to help. Questions related to privacy, security or privacy/security related software and their configurations are acceptable.
No misinformation: Extraordinary claims must be matched with evidence.
Do not post about VPNs or cryptocurrencies which are not listed on privacyguides.org. See Rule 2 for info on adding new recommendations to the website.
General guides or software lists are not permitted. Original sources and research about specific topics are allowed as long as they are high quality and factual. We are not providing a platform for poorly-vetted, out-of-date or conflicting recommendations.
Why? Don’t get me wrong, I have an Omnia as well and think it’s awesome, but I use it as an all-in-one router, as a pure wireless access point I’m sure you could get something less expensive.
deleted by creator
@TufOnTwitter @sewmopjr fair enough
you okay?
Bro has a stroke
Sounds decent.
Most routers can have VLAN functionality if you flash them with custom firmware. You get allllll the settings then. I have a netgear router that now has an FTP server and a bunch of other stuff. All you have to do is make sure the model you buy has a chipset supported by the firmware. Firmwares include:
I’m sure someone will come in and say that using a consumer grade router is naff, but in my (somewhat limited) experience working with managed switches in an industrial setting, a custom consumer router is much more feature-rich. Unless you need the IO of a managed switch (ie SFPs) I see no reason to go down that route.
If you are using SFPs, be sure to get the knock off ones that can be programmed - there should be places that sell them and program them at no extra cost. They can literally be 1/10 of the cost of the manufacturer’s own modules.
if the firewall can be updated regularly then sure.
Mikrotik makes perfectly acceptable switches at a reasonable price with a variety of features, vlan compat is pretty common. A MikroTik CSS610-8P-2S+in will give you 2 10 Gb sfp , 8 x 1Gbe with PoE+ and vlans for under 300 bucks.
I’m not OP but that 'tik is almost perfect for me, going along with the RB5009 I already have. Is there something similar that can run RouterOS I wonder?
There definately is something. They have a ton of products. I’d have to look through my list as well. The CSS runs switchos lite, but honestly its fine. I can do CLI configs (brocade, cisco, cisco smb etc) but its whatever.
At my parents house i have been using a Mikrotik RB260GSP since about 2016 on their net. It also runs swos and im not doing anything crazy on it (in fact i never bothered with VLAN’s there though i probably should setup a guest vlan. But its been fine for years now.